Specifying Transmission Source Information For Direct Faxing And Ip Address Faxing (Mode 351) - Konica Minolta bizhub 200 User Manual

Specifying management settings
Specifying transmission source information for direct faxing and IP
address faxing (mode 351)
Specify the transmission source information for directly faxing or forwarding
received IP address fax documents.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7, 6, 5, 4,
3, 2
1
0
200/250/350
7 6 5 4 3 2 1 0
0 0 0 1 1 0 0 0 (HEX: 10)
Description
--------------------------
Specifies whether the
IP address or the de-
vice name of the trans-
mission source is
added to the Subject
line when a received IP
address fax document
is forwarded.
--------------------------
Setting Description
000110 *Do not change these bits.
0 Priority given to device
name
1 Priority given to IP address
0 *Do not change this bit.
7
Page Refer-
ence
----------
----------
----------
----------
7-17