3Com SECPATH U200-CS Installation Manual page 105

Figure 6-19 Page for maintaining device configuration files
On the page, you can perform the tasks described in Table 6-19.
Table 6-19 Maintain configuration files
Tab
Configuration File
Information
Import Configuration
File
Upload Configuration
File
Export Configuration
File
Add Configuration File
Table 6-20 describes the fields of the backup configuration file list.
View information about configuration files.
Click the icon for a configuration file to specify the path for saving
the compressed configuration file on the local console PC.
Click the icon for a configuration file to import it to the U200 series
device. The device automatically restarts to bring the configuration into
effect.
Import a compressed configuration file from the local console PC to the
U200 series device by clicking Import after specifying the path of the file.
The device automatically restarts to bring the configuration into effect.
Upload a compressed configuration file from the local console PC to the
U200 series device by specifying the path of the file and clicking Upload.
Export a configuration file from the U200 series device to save it as the
backup configuration file with the specified configuration ID on the console
PC. To do this, specify the configuration ID, click Export, and specify the
path for the compressed backup file in the following pop-up dialog box.
Backup the current configuration file as a compressed file with the
specified configuration ID after inputting the configuration ID and clicking
Add.
6-40
Task