3Com SECPATH U200-CS Installation Manual page 61

Secpath u200 series unified threat management products

Table of Contents

BootWare Size

: 1536KB

Flash Size

: 32MB

CPLD Version

: 1.0

PCB Version

: Ver.A

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Press Ctrl+B at this prompt to enter the extended BootWare menu, or let the system start to

decompress the application program.

To enter the extended BootWare menu, press Ctrl+B as prompted within four seconds; otherwise,

the system will proceed with application decompression.

If you want to enter the extended BootWare menu after the system starts application

decompression, you need to restart the UTM device.

Starting to get the main application file--flash:/main.bin!................

........................................................................

The main application file is self-decompressing.............................

..........................................................................

...............................................................

Done!

System is starting...

User interface con0 is available.

Press ENTER to get started.

Press Enter. The screen will display:

<H3C>

5-6

Table of Contents

Chapters

Table of Contents