Rack-Mounting A U200 Series Device - 3Com SECPATH U200-CS Installation Manual

Length and width of the workbench are larger than the distance between the feet of the device. See
Table 4-1 for the dimensions of the U200 series devices.
Table 4-1 Dimensions of the U200 series devices
Item
Dimensions without
feet or rack-mounting
brackets (H × W × D)
Make sure that:
The workbench is steady and well grounded.
The workbench is sturdy enough to support the weight of the device and installation accessories.
There is at least 10 cm (3.94 in.) of clearance around the device for heat dissipation.
No heavy object is placed on the device for fear of device damage and poor heat dissipation.

Rack-Mounting a U200 Series Device

Installing an N68 rack
A U200 series device can be installed in an H3C N68 rack. For how to install an N68 rack, see N68
Cabinet Installation Guide.
Attaching rack-mounting brackets onto the device
The rack-mounting brackets for the U200-S are different from those used for the U200-A and the
U200-M as shown in Figure 4-2 and Figure 4-3.
Figure 4-2 Rack-mounting brackets for the U200-S
(1) Left front rack-mounting bracket
U200-A
44.2 × 442 × 400 mm (1.74 × 17.40 × 15.75
in.)
4-2
Description
U200-M
43.6 × 300 × 260 mm (1.72
× 11.81 × 10.24 in.)
(2) Right front rack-mounting bracket
U200-S