3Com SECPATH U200-CS Installation Manual page 104

Configure automatic upgrade settings as shown in Table 6-17.
Table 6-17 Automatic upgrade settings
Item
Enable the automatic upgrade function by selecting the Enable option.
Enable
You can proceed with other configuration items only when this option is selected.
Specify when to start automatic upgrade and the upgrade interval.
Start from
For example, if you want to start upgrading a signature database from 19:00 on
May 6 and automatically upgrade it every seven days, set the start time to
Interval
2009-03-06 19:00 and the interval to 7 days, as shown in the figure above.
Performing manual upgrade
Select System Management > Device Management > Upgrade > Manual from the navigation tree to
enter the manual upgrade configuration page.
Figure 6-18 Page for manually upgrading a signature database
Make settings to manually upgrade a signature database as shown in Table 6-18.
Table 6-18 Settings for manually upgrading a signature database
Item
Signature Package Type
Protocol
Upgrade Package Location
Click Apply to start upgrading the signature database.
Maintaining device configuration
Select System Management > Device Management > Configuration Maintenance from the
navigation tree to enter the page where you can maintain the configuration files of the device.
Description
Select the signature database to be upgraded.
Specify the protocol for downloading the upgrade package.
Specify the path and name of the upgrade package,
192.168.1.16/abc for example.
6-39
Description