3Com SECPATH U200-CS Installation Manual page 79

After modifying the baud rate of the serial interface and the terminal, return to the BootWare operation
submenu and select 1, the system displays the following:
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCC...
Select Transfer > Send file... in the terminal window. The following dialog box appears:
Figure 6-7 Send File dialog box
Click Browse... to select the application file to be downloaded, and select Xmodem from the Protocol
drop-down list. Then click Send and the following dialog box appears:
Figure 6-8 Sending file dialog box
After the file is downloaded successfully, the following information appears on the terminal interface:
Download successfully!
534828 bytes downloaded!
Updating Basic BootWare? [Y/N]
If you select N, the system displays:
Not update the Basic!
Updating Extend BootWare? [Y/N]
The system stops upgrading the basic segment and asks whether to upgrade the extended segment.
If you select Y, the system continues upgrading the basic segment and displays:
6-14