3Com SECPATH U200-CS Installation Manual page 3

About This Manual
Organization
H3C SecPath U200 Series Unified Threat Management Products Installation Manual is organized as
follows:
Chapter
1 Product Overview
2 Interface Modules
3 Preparing for Installation
4 Installing the U200 Series
Device
5 Starting and Configuring
the U200 Series Device
6 Maintaining Software
7 Maintaining Hardware
8 Troubleshooting
Appendix Compliance and
Safety Manual
Conventions
The manual uses the following conventions:
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
Briefly introduces the product specifications, as well as the features
and applications of the H3C SecPath U200 series UTM devices.
Describes the interface cards and interface modules supported by
the H3C SecPath U200 series UTM devices.
Describes the site requirements for installing the H3C SecPath U200
series UTM devices, safety recommendations before and during
installation, and required tools.
Introduces how to install an H3C SecPath U200 series UTM device,
as well as how to connect the power cable, console cable, Ethernet
cable, and interface cable.
Describes how to boot and configure an H3C SecPath U200 series
UTM device, including device startup, power-on, and initialization of
system files.
Introduces how to maintain software of the H3C SecPath U200
series UTM devices, including upgrading software and updating
configuration files.
Introduces how to maintain hardware of the H3C SecPath U200
series UTM devices.
Describes some problems you may encounter during installation and
startup of an H3C SecPath U200 series UTM device and how to
solve them.
This section introduces part of the compliance and safety
precautions that should be followed during the installation and
maintenance of the equipment.
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are optional.
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
Contents
Description