3Com SECPATH U200-CS Installation Manual page 70

Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : May 7 2008
CPU Type : XLS208
CPU L1 Cache : 32KB
CPU Clock Speed : 750MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 32MB
CPLD Version : 1.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl+B to enter the extended BootWare menu; otherwise, the system enters the self extraction
process of applications.
You must press Ctrl+B in four seconds when "Press Ctrl+B to enter extended boot menu" appears.
Otherwise, the system will read and decompress the application file instead of entering the
extended BootWare menu.
After the system enters the self extraction process of applications, if you want to enter the extended
BootWare menu, you need to reboot the device.
The extended BootWare menu is referred to as BootWare main menu in this manual unless
otherwise specified.
Press Ctrl+B when "Press Ctrl+B to enter extended boot menu..." appears. The system displays:
Please input BootWare password:
You can try up to three times to enter the correct BootWare password (the initial password is null). If you
fail to provide the correct password with three attempts, you need to reboot the system. After you type
the correct password, the system enters the BootWare main menu:
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==================<EXTEND-BOOTWARE MENU>=====================
| <1> Boot System
| <2> Enter Serial SubMenu
| <3> Enter Ethernet SubMenu
| <4> File Control
| <5> Modify BootWare Password
| <6> Skip Current System Configuration
|
|
|
|
|
|
6-5