3Com SECPATH U200-CS Installation Manual page 82

Secpath u200 series unified threat management products
Table of Contents

Advertisement

Gateway IP Address
FTP User Name
FTP User Password
Table 6-7 Description on the display information of setting Ethernet interface parameters
Display information
'.' = Clear field
'-' = Go to previous field
Ctrl+D = Quit
Protocol (FTP or TFTP)
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
FTP User Password
To use the default parameter after the colon, press Enter directly.
Step3 After the above configuration, the system will automatically return to the Ethernet submenu, where you
can select 2 to upgrade the main application file.
Loading................................... done
11611272 bytes downloaded!
Updating File flash:/utm.bin
.........
.........done
:
:
:
Shortcut key . is used to clear the current input.
Shortcut key - is used to return to the previous field.
Shortcut key Ctrl+D is used to quit the parameter setting page.
Choose to upgrade application programs using TFTP/FTP
Name of the download file, which needs to be the same with that of
the actual file to be downloaded.
At the same time, you need to set the download path in TFTP/FTP.
Note that:
The first "main.bin" is the file name automatically remembered by
the system at the last update; the second "main.bin" is the source
file name set by the user.
An application file name including the extension such as .bin,
cannot exceed 50 characters.
Name of the target file after the file is downloaded to the device. The
extension of the target file needs to be the same with that of the
downloaded file.
Note that the first "main.bin" is the file name automatically
remembered by the system at the last update; the second "main.bin"
is the source file name set by the user.
IP address of the FTP/TFTP server.
IP address of the interface connected with the FTP/TFTP server.
IP address of the gateway. You need not configure this IP address.
FTP username, which will be used in FTP download. TFTP
download needs no username.
FTP password, which will be used in FTP download. TFTP needs no
password.
6-17
Description

Advertisement

Chapters

Table of Contents
loading

Table of Contents