Injecting a Local IPv6 MBGP Route
Follow these steps to inject a local IPv6 MBGP route:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Inject a network to the IPv6
MBGP routing table
Configuring IPv6 MBGP Route Redistribution
Follow these steps to configure IPv6 MBGP route redistribution:
To do...
Enter system view
Enter BGP view
Enter the MBGP multicast
address family view
Enable default route
redistribution into the IPv6
MBGP routing table
Enable route redistribution from
another routing protocol
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.
Configuring IPv6 MBGP Route Summarization
To reduce the routing table size on medium and large BGP networks, you need to configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast
routes.
Use the command...
system-view
bgp as-number
ipv6-family multicast
network ipv6-address
prefix-length [ route-policy
route-policy-name | short-cut ]
Use the command...
system-view
bgp as-number
ipv6-family multicast
default-route imported
import-route protocol
[ process-id ] [ med med-value |
route-policy
route-policy-name ] *
1-4
Remarks
—
—
—
Required
Not injected by default
Description
—
—
—
Optional
By default, default route
redistribution is not allowed.
Required
Not enabled by default