Incorrect Server Port Number On The Access Device - H3C LS-3100-52P-OVS-H3 Operation Manual

Solution
Use the display portal server command to display the key for the portal server on the access
device and view the key for the access device on the portal server.
Use the portal server command to modify the key on the access device or modify the key for the
access device on the portal server to ensure that the keys are consistent.

Incorrect Server Port Number on the Access Device

Symptom
After a user passes the portal authentication, you cannot force the user to log out by executing the
portal delete-user command on the access device, but the user can log out by using the disconnect
attribute on the authentication client.
Analysis
When you execute the portal delete-user command on the access device to force the user to log out,
the access device actively sends a REQ_LOGOUT message to the portal server. The default listening
port of the portal server is 50100. However, if the listening port configured on the access device is not
50100, the destination port of the REQ_LOGOUT message is not the actual listening port on the server.
Thus, the portal server cannot receive the REQ_LOGOUT message. As a result, you cannot force the
user to log out the portal server.
When the user uses the disconnect attribute on the client to log out, the portal server actively sends a
REQ_LOGOUT message to the access device. The source port is 50100 and the destination port of the
ACK_LOGOUT message from the access device is the source port of the REQ_LOGOUT message so
that the portal server can receive the ACK_LOGOUT message correctly, no matter whether the listening
port is configured on the access device. Therefore, the user can log out the portal server.
Solution
Use the display portal server command to display the listening port of the portal server on the access
device and use the portal server command in the system view to modify it to ensure that it is the actual
listening port of the portal server.
1-24