H3C LS-3100-52P-OVS-H3 Operation Manual page 1549

To do...
Set the maximum number of
lines the screen can contain
Make terminal services
available
Set the display type of a
terminal
Display the information about
the current user interface/all
user interfaces
Display the physical attributes
and configuration of the
current/a specified user
interface
Use the command...
screen-length screen-length
shell
terminal type { ansi | vt100 }
display users [ all ]
display user-interface [ type
number | number ] [ summary ]
1-3
Remarks
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the terminal display
type is ANSI. The device must
use the same type of display as
the terminal. If the terminal
uses VT 100, the device should
also use VT 100.
You can execute this command
in any view.
You can execute this command
in any view.