For Your Safety - ELNA XQUISIT 2 Manual

For Your Safety

Before connecting the power cord, make sure the voltage and frequency shown on the machine are identical to
your electrical power. USA only – Item: Rated Voltage/Power Consumption, Specification: 120V/0.9A
60Hz.
Your machine may come equipped with a polarized plug (one prong wider than the other). A polarized plug
reduces the risk of electrical shock. This plug is intended to fit into a polarized outlet. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
Do not use extension cords or plug adapters.
Do not touch plug with wet hands.
Always turn off the power/light switch first and then unplug from the electrical outlet. Examples:
when leaving the machine unattended
during an electrical storm or power failure
when cleaning the machine
Always turn off the power/light switch:
when attaching or removing parts such as needle, presser foot, needle plate or embroidery unit
when manually threading needle or bobbin
when changing foot pressure
Do not place anything on the foot control.
Do not place heavy items on cords. Do not subject cords to heat. Do not use damaged cords. Have the cord
repaired immediately.
While the machine is in operation, always keep your eye on the sewing area and do not touch any moving parts
such as the thread take-up lever, handwheel or needle.
14