Flat Fell Seam - ELNA XQUISIT 2 Manual

1
2
3
4
1.5 cm (5/8")
0.7 cm (1/4")

Flat Fell Seam

A method of finishing a seam edge, often found on
denim. It totally encloses the raw fabric edges into
the seam, a very durable result.
1. Place fabric right sides together and sew seam.
2. Trim off half of one of the seam allowances.
3. Open the fabrics and press seam allowances to
one side (press wide edge over trimmed edge).
4. Wrap wide seam allowance around and under
trimmed seam allowance. Press. Sew folded
edge.
45