Automatic Needle Threader - Manual Operation - ELNA XQUISIT 2 Manual

1
A
2
3
4
26
Automatic Needle Threader -
Operation
NOTE: Check needle size. Use only size 11/75 –
16/100 (excluding twin and hemstitch/wing
needles) for automatic top threading. Any other
size needle requires manual threading. See
pages 24 - 25.
1. Lower presser foot. Press
2. Pivot needle threader as shown and hook will go
B
3. Release needle threader and hook will catch
4. Pull thread loop to the back to complete
is raised. Pull needle threader down. Place
thread into hook A.
CAUTION: Do not lower needle threader
while the machine is sewing.
through eye of needle. Pass thread in front of
needle eye B.
thread pulling it through the needle eye.
threading the needle eye.
Manual
key until needle