Getting Ready To Embroider - ELNA XQUISIT 2 Manual

Exquisite embroidery is unlimited with your Elna
Xquisit II.
Choose from a wide array of built-in designs and
alphabets and optional embroidery cards. Connect
your Xquisit II directly to your computer to create
your own designs using Elna's Xpressive software.
NOTE: Copyright information – The built-in
designs and designs found on the embroidery
cards are intended for private use only. Any
public or commercial use of these designs is an
infringement of copyright law and is strictly
prohibited.
CAUTION: Never lift or move the embroidery
unit using the carriage as a handle. Grasp the left
side and front extension to lift and move
embroidery unit.
102
SECTION VI

Getting Ready to Embroider

CAUTION: Never move the sewing machine with
the embroidery unit attached. The embroidery
unit could fall off and break or injure you.
CAUTION: Do not touch the inner connector pins
on the embroidery unit as they may become
damaged.
CAUTION: When the machine is embroidering, to
prevent injury be sure to keep your hands and
any other objects away from the embroidery
carriage and frame/hoops.
NOTE: When embroidery unit is attached,
machine can only be operated with
See page 11. Do not connect foot control. Use
the speed control lever to adjust your
embroidery sewing speed. See page 10.
key.