ELNA XQUISIT 2 Manual page 120

10. Touch key.
Touch key to make a new selection.
Touch key to delete design.
Embroidering a Single Character (Letter)
1. Touch key until Custom alphabet appears.
Select E.
Touch key.
Setting Character Size
2. Touch key. Use the
to change the letter size in 1 mm increments or
select one of the preset sizes.
(To change default 15 mm size, see page 152.)
NOTE: The size is limited by the number of
letters being embroidered, their location and
rotation within the frame.
NOTE: If the size is set lower than 15 mm,
the letters will be represented within the
frame by blank squares .
HINT: If the size is set lower than 10 mm,
use 100 wt. embroidery thread in the needle
for ultra fine lettering.
HINT: Elna recommends sewing at a
medium embroidery speed for optimum
results when characters are 40 mm or larger.
Touch key.
and keys
119