Bartack - ELNA XQUISIT 2 Manual

64

Bartack

On-screen manual – see stitch 1/26
A bartack is a reinforced stitch used on garment
areas that receive extra stress, like pockets, belt
loops and zippers.
1. Attach buttonhole foot and pull 10 cm (4") of
both threads under foot.
2. Place fabric under foot. Lower presser foot.
Begin sewing without lowering buttonhole lever
A.
3. Press key when desired bartack length is
sewn.
4. Machine will sew bartack stitch after needle
returns to start position.
5. When bartack is complete, press
temporarily memorizes the bartack length.)
6. Press key to automatically sew a
memorized bartack.
7. When bartack stitching reaches the original start
point, press key to complete bartack.
NOTE: To change memorized bartack length,
select bartack stitch and repeat steps 2-5.
key. (This