Important Safety Instructions - ELNA 664 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with this overlock machine.
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
This overlock machine is designed and manufactured for household use only.
Read all instructions before using this overlock machine.
DANGER
1. An appliance should never be left unattended when plugged in. Always unplug this overlock
machine from the electric outlet immediately after using and before cleaning.
2. Always unplug before replacing a overlock machine bulb. Replace bulb with same type rated 15
Watts.
WARNING
1. Do not allow to be used as a toy. Close attention is necessary when this overlock machine is used
by or near children.
2. Use this appliance only for its intended use as described in this owner's manual.
Use only attachments recommended by the manufacturer as contained in this owner's manual.
3. Never operate this overlock machine if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water.
Return this overlock machine to the nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this
overlock machine and foot controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the overlock machine
needle and/or cutting blade.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this overlock machine off ("O") when making any adjustment in the needle area, such as
threading the needle, changing the needle, threading the bobbin or changing the presser foot, and
the like.
15. Always unplug this overlock machine from the electrical outlet when removing covers, lubricating,
or when making any other adjustments mentioned in this owner's manual.
SAVE THESE INSTRUCTIONS
The design and specifications are subject to change without a prior notice.
Please note that on disposal, this product must be safely recycled in accordance with relevant National
legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance.
(European Union only)
—
To reduce the risk of electric shock:
—
To reduce the risk of burns, fire, electric shock, or injury to persons:
1