ELNA XQUISIT 2 Manual page 112

2
3
4
5
6
2. Turn on power/light switch. Touch Welcome
screen.
Touch key.
Touch key.
3. Touch "Large", "Medium" or "Small" bobbin
winding quantity key. This is only valid for the
first bobbin winding. Once the Automatic Bobbin
Winding system is active, subsequent bobbin
windings will be the "Large" quantity default
setting. If you want to change the default bobbin
winding amount see page 152.
4. Open automatic bobbin winder cover. Open
bottom spool pin cover.
5. Place spool of fine bobbin embroidery thread on
spool pin and attach spool cap.
6. Insert back extension of bobbin winder guide
under hinge of bobbin winder cover and push
front of guide down. Guide will click into place.
111