Lan - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
LAN is short for Local Area Network. This is considered your internal
network. These are the IP settings of the LAN interface for the DAP-
2590. These settings may be referred to as private settings. You
may change the LAN IP address if needed. The LAN IP address is
private to your internal network and cannot be seen on the Internet.
After completing the desired LAN settings, click the Save button to
let your changes take effect.
Get IP From: Choose Static IP (Manual) if you do not have a DHCP
server on your network, or if you wish to assign a
static IP address to the DAP-2590. When Dynamic IP
(DHCP) is selected, the other fields here will be grayed
out. Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
IP Address:
The default IP address is 192.168.0.50. Assign a static
IP address that is within the IP address range of your
network.
Subnet Mask:
Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default
Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within
Gateway:
the range of your network.
D-Link DAP-590 User Manual

LAN