Using The Configuration Menu - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
To configure the DAP-2590, use a computer that is connected to the DAP-2590 with an Ethernet cable (see the Network Layout
diagram ).
First, disable the "Access the Internet using a proxy server" function. To disable this function, go to Control Panel > Internet Options >
Connections > LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Mozilla Firefox).
Type the IP address and http port of the DAP-2590 in the address field (http://192.168.0.50) and press Enter. Make sure that the IP
addresses of the DAP-2590 and your computer are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DAP-2590, make sure to
enter the correct IP address.
• Type "admin" in the User Name field.
• Leave the Password field blank.
• Click the Login button.
D-Link DAP-590 User Manual

Using the Configuration Menu

Note: If you have changed the password, make sure to enter the correct password.
1