Home > Basic Settings > Wireless; Access Point Mode - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
In Access Point mode, the DAP-2590 functions as a wireless AP.
After completing the desired settings, click the Save button to let
your changes take effect.
Wireless Band: Select either 2.4 GHz or 5 GHz from the
pull-down menu.
Mode:
Select Access Point from the pull-down
menu. The other three choices are WDS with
AP, WDS, and Wireless Client.
Network Name (SSID):
Service Set Identifier (SSID) is the name
designated for a specific wireless local
area network (WLAN). The SSID's factory
default setting is dlink. The SSID can
easily be changed to connect to an existing
wireless network or to establish a new
wireless network. The SSID can be up to 32
characters and is case-sensitive.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it
visible to all network users.
Auto Channel Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set
Selection:
by default. The channel selection process only occurs when the AP is booting up.
Channel:
All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel
Selection setting to Disable, and then use the pull-down menu to make the desired selection. (Note: The wireless
adapters will automatically scan and match the wireless settings.)
D-Link DAP-590 User Manual
Home > Basic Settings > Wireless

Access Point mode

15