Multi-Ssid - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
The device supports up to eight multiple Service Set Identifiers. You
can set the Primary SSID in the Basic > Wireless section. The SSID's
factory default setting is dlink. The SSID can be easily changed to
connect to an existing wireless network or to establish a new wireless
network. When the information for the new SSID is finished, click the
Add button. Click the Save button to let your changes take effect.
Check to enable support for multiple SSIDs.
Enable Multi-SSID:
Enable Priority: Check to enable the priority feature.
Band:
This read-only value is the current band setting.
Index:
You can select up to seven multi-SSIDs. With the
Primary SSID, you have a total of eight multi-SSIDs.
SSID: Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID's factory default setting is
be easily changed to connect to an existing wireless
network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all
network users.
Security:
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1X. For a detailed description of
the Open System parameters please go to page 23. For a detailed description of the WPA-Personal parameters please go to
page 24. For a detailed description of the WPA-Enterprise parameters please go to page 25. For a detailed description of the
802.1X parameters please go to page 26.
D-Link DAP-590 User Manual
The SSID can be easily changed to
dlink.
The SSID can

Multi-SSID

1