D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual page 18

Section  - Configuration
Channel Width: Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n and
non-802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4� and Mixed 802.11
a/n in 5�. 802.11n wireless devices are allowed to transmit data using 40 MHz when the channel width is Auto 20/40
MHz.
Remote AP MAC
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple
Address: networks.
Site Survey:
Click the Scan button to search for available wireless networks, then click on the available network that you want to
connect with.
Authentication:
Use the pull-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is
enabled, this option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is
required.
For more information about the different types of Authentication offered on the DAP-2590 and the respective settings of
each, please go to the first page of the "Authentication" explanations, which begins on page 23.
D-Link DAP-590 User Manual 1