Section - Configuration
Encryption: Use the radio button to disable or enable encryption.
Key Type:
Select HEX** or ASCII*.
Key Size:
Select 64 Bits or 128 Bits.
Key Index (1~4):
Select the 1st through the 4th key to be the active
key.
Network Key:
Input up to four keys for encryption. You will select one
of these keys in the Key Index pull-down menu.
Confirm Key:
Retype the Network Key entered above in the
corresponding field.
*ASCII (American Standard Code for Information Interchange) is a code that
represents English letters using numbers ranging from 0-127.
**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
D-Link DAP-590 User Manual
Open System or Shared Key authentication