Wds With Ap Mode - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
In WDS with AP mode, the DAP-2590 wirelessly connects multiple
networks while still functioning as a wireless AP. After completing
the desired settings, click the Save button to let your changes take
effect.
Wireless Band: Select either 2.4 GHz or 5 GHz from the pull-down
menu.
Mode:
WDS with AP mode is selected from the pull-down
menu.
Network Name
Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The
SSID can be easily changed to connect to an
existing wireless network or to establish a new
wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel Enabling this feature automatically selects
Selection: the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
Channel:
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.)
D-Link DAP-590 User Manual

WDS with AP mode

1