Wds Mode - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
In WDS mode, the DAP-2590 wirelessly connects multiple networks,
without functioning as a wireless AP. After completing the desired
settings, click the Save button to let your changes take effect.
Wireless Band: Select either 2.4 GHz or 5 GHz from the pull-down
menu.
Mode:
WDS is selected from the pull-down menu.
Network Name
Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN). The
SSID's factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel
Enabling this feature automatically selects the channel
Selection:
that will provide the best wireless performance. This
feature is not supported in WDS mode.
Channel:
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Channel Width: Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n
and non-802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4� and Mixed
802.11 a/n in 5�. 802.11n wireless devices are allowed to transmit data using 40 MHz when the channel width is Auto
20/40 MHz.
D-Link DAP-590 User Manual

WDS mode

19