Filters > Wlan Partition - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
The DAP-2590 features a wireless partition. Once a user is finished with
these settings, click the Save button to let the changes take effect.
Wireless Band:
Displays the current wireless band rate.
Link Integrity: Select Enable or
between the LAN and the AP is disconnected, enabling
this feature will cause the wireless segment associated
with the AP to be disassociated from the AP.
Ethernet to The default is Enable. When disabled, all data from the
WLAN Access: Ethernet to associated wireless devices will be blocked.
Wireless devices can still send data to the Ethernet.
Internal Station The default value is Enable, which allows stations to
Connection: intercommunicate by connecting to a target AP. When
disabled, wireless stations cannot exchange data on the
same Multi-SSID. In �uest mode, wireless stations cannot
exchange data with any station on your network.
D-Link DAP-590 User Manual
Filters > WLAN Partition
Disable.
If the Ethernet connection