Technical Specifications - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Appendix A - Technical Specifications
Standards
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11n (draft)
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3af
Network Management
• Web Browser interface
HTTP
Secure HTTP (HTTPS)
• AP Array
• AP Manager II
• SNMP Support
D-View Module
Private MIB
• Command Line Interface
Telnet
Secure SSH Telnet
Data Rates*
For 802.11a:
• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
For 802.11b:
• 11, 5.5, 2, and 1 Mbps
For 802.11g:
• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
For 802.11n (draft): HT20/HT40
• 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5, 52/108,
39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 Mbps
Security
• WPA™ Personal/Enterprise
• WPA2™ Personal/Enterprise
• WEP™ 64-/128-bit
• SSID Broadcast Disable
• MAC Address Access Control
D-Link DAP-590 User Manual

Technical Specifications

Wireless Frequency Range
• 2.4 to 2.4835 �Hz and 5.15 to 5.85 �Hz�� ��
Operating Voltage
• 5V/2.5A or PoE
Radio and Modulation Type
For 802.11a/g/n:
BPSK, QPSK, 16QAM, and 64QAM with OFDM
For 802.11b:
DQPSK, DBPSK, DSSS, and CCK
Operating Frequency* *
For 802.11a:
5.15 ~ 5.85 �Hz
For 802.11b/g:
2400 ~ 2483.5 MHz ISM band
For 802.11n:
2.4 �Hz Band: 2.4 ~ 2.4835 �Hz
5 �Hz Band: 5.15 ~ 5.85 �Hz
Dipole Antenna
4dBi �ain @2.4 �Hz
6dBi �ain @5 �Hz
�Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and
Draft 802.11n specifications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials
and construction, and network overhead, lower actual data throughput rate.
Environmental conditions will adversely affect wireless signal range.
��Please note that operating frequency ranges vary depending on the regulations
of individual countries and jurisdictions. The DAP-2590 isn't supported in the
5.25~5.35 �Hz and 5.47 ~ 5.725 �Hz frequency ranges in some regions.
1