Filters > Wireless Mac Acl - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
The DAP-2590 features a wireless MAC Access Control List filter.
Once a user is finished with these settings, click the Save button to
let the changes take effect.
Wireless Band:
Displays the current wireless band rate.
Access Control List: Select Disable to disable the filters function.
Select Accept to accept only those devices with
MAC addresses in the Access Control List. All
other devices not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
MAC Address:
Enter each MAC address that you wish to include
in your filter list, and click Add.
MAC Address List:
When a MAC address is entered, it appears in
this list. Highlight a MAC address and click the
Delete icon to remove it from this list.
Current Client
This table displays information about all the current connected stations.
Information:
D-Link DAP-590 User Manual
Filters > Wireless MAC ACL