Lan - D-Link DAP-2662 User Manual

Web User Interface
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2662. These
settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network
and cannot be seen on the Internet.
Get IP From: Dynamic IP (DHCP) is chosen here. Choose this option if
you have a DHCP server in your network. When Dynamic
IP (DHCP) is selected, the other fields here will be grayed
out. Please allow about 2 minutes for the DHCP client to
be functional once this selection is made. If you wish to
assign a static IP address to the DAP-2662, choose Static
IP (Manual).
IP Address:
Assign a static IP address that is within the IP address
range of your network.
Subnet Mask: Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default Gateway:
Enter the IP address of the gateway/router in your
network.
DNS: Enter a DNS server IP address. This is usually the local IP
address of your gateway/router.

LAN

22