Assigning An Ip Address - HP Ew2400 - JetDirect Print Server Administrator's Manual

Assigning an IP Address

Before you can set up a printer for LPR printing, assign an IP
address to the printer or print server. Use the HP LaserJet Utility
to configure the printer IP address as follows:
1. Double-click HP LaserJet Utility in the HP LaserJet folder.
2. Click the Settings button.
3. Select TCP/IP from the scrolling list and then click Edit.
4. Select the desired option. You can automatically obtain the
TCP/IP configuration from either the DHCP server or the
BOOTP server, or you can manually specify the TCP/IP
configuration.
Setting Up Mac OS
To configure a computer for LPR printing, do the following:
1. Launch the Desktop Printer Utility.
2. Select Printer (LPR) and click OK.
3. In the PostScript Printer Description (PPD) File section, click
Change... and select the PPD for your printer.
4. In the Internet Printer or the LPR Printer section, depending on
your version of the Desktop Printer Utility, click Change....
5. Enter the printer's IP address or domain name for Printer
Address.
6. Enter the queue name, if used. Otherwise, leave it blank.
Note
7. Click Verify to verify that the printer was found.
8. Click OK or Create, depending on your version of the Desktop
Printer Utility.
9. Go to the File menu and select Save or use the resulting save
dialog, depending on your version of the Desktop Printer Utility.
ENWW
The queue name is typically raw. Other valid queue
names are text, binps, auto, or a user-defined
queue name (user-defined print queues can be set
up through Telnet or the embedded Web server, see
Chapter 4).
Configuring for LPD Printing 170