HP Ew2400 - JetDirect Print Server Administrator's Manual page 83

Hp jetdirect administrator's guide
Hide thumbs Also See for Ew2400 - JetDirect Print Server:
Table of Contents

Advertisement

Table 3.4
Telnet Commands and Parameters (5 of 18)
TCP/IP Main
Command
host-name
ip-config
ip
subnet-mask
default-gw
ENWW
Description
Alphanumeric string (up to 32 characters), to assign or
change the name of the network device. For example,
"host-name printer1" assigns the name "printer1" to the
device. The default host name is NPIxxxxxx, where xxxxxx
are the last six digits of the LAN hardware (MAC) address.
Specify the configuration method:
manual: The print server will wait for IP parameters using
manual tools (such as Telnet, embedded Web server,
control panel, installation/management software). Status
will be User Specified.
bootp: The print server will send BOOTP requests on the
network for dynamic IP configuration.
dhcp: The print server will send DHCP requests on the
network for dynamic IP configuration.
auto_ip: The print server will be automatically configured
with a unique link-local address 169.254.x.x.
IP address for the print server, in dotted notation. For
example:
ip-config
manual
ip
192.168.45.39
where ip-config specifies manual configuration and ip
manually sets the IP address 192.168.45.39 on the print
server.
Specifying 0.0.0.0 clears the IP address.
If you exit and save a new IP address, it must be specified
on the next Telnet connection.
A value (in dotted notation) that identifies the network and
host portions of an IP address in received messages. For
example,
subnet-mask 255.255.255.0
stores the subnet mask value 255.255.255.0 on the print
server. The value 0.0.0.0 disables the subnet mask. For
more information see
The IP address of a default gateway, in dotted notation.
For example,
default-gw 192.168.40.1
assigns 192.168.40.1 as the IP address of the default
gateway for the print server.
Note: If the HP Jetdirect print server is configured by DHCP
and you manually change the subnet mask or the default
gateway address, you should manually change the print
server's IP address. This will release the DHCP-assigned
address back to the DHCP IP address pool.
Appendix
A.
TCP/IP Configuration 83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents