HP Ew2400 - JetDirect Print Server Administrator's Manual page 127

Table 4.8 Miscellaneous Settings (5 of 5)
Item
mDNS Domain
Name
mDNS Highest
Priority Service
Proxy Server
Proxy Server Port
Proxy Server User
Name
Proxy Server
Password
Proxy Server
Exception List
ENWW
Description
(Read-only parameter) Specifies the mDNS domain name
assigned to the device, in the form <host name>.local. If a
user-specified host name has not been assigned, the default host
name NPIxxxxxx is used, where xxxxxx are the last 6 digits of the
LAN hardware (MAC) address.
Specifies the mDNS highest priority service to use for printing.To
set this parameter, choose one of the following printing options:
9100 Printing: Raw IP printing through HP-proprietary port 9100.
IPP Printing: Internet Printing Protocol printing.
LPD Printing (RAW): Default LPD raw queue printing.
LPD Printing (TEXT): Default LPD text queue printing.
LPD Printing (AUTO): Default LPD auto queue printing.
LPD Printing (BINPS): Default LPD binary postscript queue
printing.
LPD Printing (<user-defined>): Up to 5 user-specified LPD
queues will be listed if they have been configured, where
<user-defined> is the name of the user-specified LPD print
queue.
The default selection will depend on the printer, typically 9100
Printing or LPD Printing (BINPS).
Specifies the proxy server to be used by embedded applications
in your printer/MFP. A proxy server is typically used by network
clients for Internet access. It caches Web pages, and provides a
degree of Internet security, for those clients.
To specify a proxy server, enter its IP address or fully-qualified
domain name. The name can be up to 64 characters.
For some networks, you may need to contact your Independent
Service Provider (ISP) for the proxy server address.
Enter the port number used by the proxy server for client support.
The port number identifies the port reserved for proxy activity on
your network, and can be a value from 0 to 65535.
If a user account on the proxy server has been set up, enter the
name of the user account.
If a user account on the proxy server has been set up, enter the
password of the user account.
Enter Web addresses, host names, or domain names that do not
need to be accessed through the proxy server. Use semicolons
(;) to separate entries.
Using the Embedded Web Server 127