HP Ew2400 - JetDirect Print Server Administrator's Manual page 92

Table 3.4 Telnet Commands and Parameters (14 of 18)
ipx-frametype
ipx-sapinterval
ipx-mode
ipx-nds-tree
ipx-nds-context
ipx-job-poll
pjl-banner
ipx-banner
pjl-eoj
ipx-eoj
pjl-toner-low
ipx-toner-low
AppleTalk
Command
appletalk
name-override
Name
Print Type
Zone
Phase
ENWW
Specifies the IPX frame type settings available for your print
server model: AUTO (default), EN_SNAP, EN_8022,
EN_8023, EN_II. For more information, see
Specifies the time interval (1 to 3600 seconds) that the
HP Jetdirect print server waits between Service Advertising
Protocol (SAP) broadcasts on the network. The default is
60 seconds. 0 disables SAP broadcasts.
(Read-only parameter) Specifies the NetWare mode
configured on the print server, either RPRINTER or
QSERVER mode.
An alphanumeric string, up to 31 characters, that specifies
the NDS tree name for the print server.
An alphanumeric string, up to 256 characters, that specifies
the NDS context for the HP Jetdirect print server.
Specifies the time interval (1 to 255 seconds) that the
HP Jetdirect print server will wait to check for print jobs in
a print queue. The default is 2 seconds.
Enables or disables printing an IPX banner page through
Printer Job Language (PJL). 0 disables banner pages. 1
(default) enables banner pages.
Enables or disables IPX end-of-job notification through PJL.
0 disables, 1 (default) enables.
Enables or disables IPX toner-low notification through PJL.
0 disables, 1 (default) enables.
Description
Enables or disables AppleTalk (EtherTalk) protocol
operation on the print server. 0 disables, 1 (default) enables.
For example,
appletalk 0 will disable AppleTalk operation
(External print servers only) Specifies the name of the
AppleTalk network. Up to 32 characters may be used.
(Read-only parameter) The name of the printer on the
AppleTalk network. A number after the name indicates that
there are multiple devices with this name, and this is the Nth
instance of the name.
(Read-only parameter) Specifies the AppleTalk network
printer type reported by the Jetdirect print server. Up to three
print types may be reported.
(Read-only parameter) The name of the AppleTalk network
zone on which the printer is located.
(Read-only parameter) AppleTalk phase 2 (P2) is
preconfigured on the HP Jetdirect print server.
Chapter
TCP/IP Configuration 92
9.