HP Ew2400 - JetDirect Print Server Administrator's Manual page 216

Table 9.6 TCP/IP Configuration Information (2 of 4)
Message
DEFAULT GATEWAY:
CONFIG BY:
BOOTP SERVER:
or
DHCP SERVER:
or
RARP SERVER:
BOOTP/DHCP
SERVER:
ENWW
Description
The IP address of the gateway used when sending packets
off the local network. Only one default gateway may be
configured. During initialization, a temporary value 0.0.0.0
is displayed. If not provided, the IP address of the Jetdirect
print server is used.
NOT SPECIFIED: Indicates that a default gateway is not
configured.
Identifies how the HP Jetdirect print server obtained its
IP configuration:
BOOTP: Automatic configuration through a BOOTP server.
BOOTP/TFTP: Automaticautomatic configuration through
a BOOTP server and TFTP configuration file.
DHCP: Automatic configuration through a DHCP server
DHCP/TFTP: Automatic configuration through a DHCP
server and TFTP configuration file.
RARP: Automatic configuration through the Reverse
Address Resolution Protocol.
USER SPECIFIED: Manual configuration through Telnet,
the printer's control panel, HP Web Jetadmin, embedded
Web server, or other method.
DEFAULT IP: The default IP address was assigned. This
address may not be a valid address for your network.
AUTO IP: A link-local IP address (169.254.x.x) was
assigned. If the network is a link-local network, this address
should be valid.
NOT CONFIGURED: The print server was not configured
with IP parameters. Verify that TCP/IP is enabled, or check
for error status.
Displayed if BOOTP, DHCP, or RARP is used for TCP/IP
configuration. It specifies the IP address of the system that
responds to the HP Jetdirect print server's request for
automatic TCP/IP configuration over the network.
NOT SPECIFIED: Indicates that the configuration server's
IP address could not be determined or was set to zero in
the response packet.
Displayed during initialization while the HP Jetdirect print
server attempts to obtain its TCP/IP configuration from a
BOOTP or DHCP server. The temporary address
displayed is 0.0.0.0.
HP Jetdirect Configuration Page 216