HP Ew2400 - JetDirect Print Server Administrator's Manual page 32

3. Select your preferred network zone from the Select a Zone: list
and click Set Zone.
4. To exit, select Quit from the File menu.
Notify everyone on your network of the new zone for your printer
so they can select the printer in the Chooser.
Selecting Your Printer
1. Select the Chooser from the Apple menu.
2. Select the printer icon for use with your printer. If the
appropriate printer icon does not appear in the Chooser, or you
are not sure which icon to select for your printer, see
the Printer
3. If AppleTalk is not active, an alert dialog box appears on your
screen. Select OK. The Active button turns on.
If your network is linked to other networks, the AppleTalk
Zones list dialog box appears in the Chooser.
4. If applicable, select the zone in the AppleTalk Zones scrolling
list where your printer is located.
5. Select the printer name you want to use from the list of printer
names in the upper-right area of the Chooser. If the printer's
name does not appear in the list, make sure the following tasks
have been performed:
the printer is turned on and is online.
the print server is connected to the printer and to the network.
the printer cable connections are secure.
A message should appear if the printer has a control panel
READY
display. See
Note
6. Click Setup or Create in the Chooser; then, if prompted, select
the appropriate PostScript Printer Description file (PPD) for the
printer. For more information, see the online documentation.
ENWW
Software" in this chapter.
Chapter 8 for more information.
If your printer is the only name listed in the
dialog box, you must still select it. Your printer
remains selected until you select a different printer
with the Chooser.
HP Software Solutions Summary 32
"Installing