Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
Physical dimensions (W x D x H)
Weight
Input voltage
Power consumption
Operating temperature and humidity
Storage temperature and humidity
Certification and compliance
LCD MONITOR
Display
Screen size
Signal Inputs
Resolution
Refresh rate
Pixel pitch
Color depth
Pixel Arrangement
Brightness
Contrast ratio
Plug and Play
LCD quality
APPENDICES
Page 42
418 x 362 x 57 mm (16.5 x 14.3 x 2.2 in), excluding stand
6.2 kg (13.6 lb), including stand
12 VDC
45 W or less, (12 VDC)
5° to 35° C, 20 to 80% RH (noncondensing)
-10° to 60° C, 20 to 90% RH (noncondensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
FCC class B, CE, VCCI class B, EDID 1.3
TFT active matrix LCD
17.0 in, diagonal
DVI (Digital)
VGA (Analog RGB)
Synchronous frequency: 30 to 80 kHz, horizontal
Synchronous frequency: 50 to 75 Hz, vertical
1280 x 1024 pixels (SXGA), 1024 x 768 pixels (XGA),
800 x 600 pixels (SGA), 640 x 480 pixels (VGA)
50 to 75 Hz (vertical)
0.264 x 0.264 mm (0.010 x 0.010 in)
16.2 million colors (RGB 6-bits + FRC data)
RGB vertical stripe
2
260 cd/m
450:1
DDC2B
Each DTU-710 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display, and some panels may exhibit a certain number of
pixels that show an incorrect color. This does not mean the display is
defective.
Wacom quality standards are based on internationally accepted
standards for LCD monitors. Wacom requires 99.999% of the pixels
on each DTU-710 are required to function perfectly, and no pixel is
allowed to be always white or always black. A small number of pixels
(10 or less) are allowed to show a wrong color for some parts of the
color spectrum.
Advertisement
Table of Contents
Troubleshooting
