Wacom CINTIQ 17SX Installation Manual And User's Manual page 36

WINDOWS-SPECIFIC PROBLEMS
Windows 98SE or Me:
When working with multiple
monitors, the screen cursor
positioning is incorrect after
moving into the unmapped
area of the virtual desktop.
Windows 98SE or Me:
Your pen does not function
inside a full screen DOS
window.
After pressing
C +A +D , the screen
TRL LT EL
cursor cannot be controlled
with your pen.
Windows XP:
After installing the pen
display tablet on a system
with multiple users, the pen
tablet only works on the
primary user desktop.
TROUBLESHOOTING
Page 34
On a multiple monitor system, the pen display tablet is mapped to the
virtual desktop (a rectangular area covering all monitors).
If your video display areas do not form a rectangle because they are
different sizes or they are not evenly aligned, the screen cursor
positioning will be incorrect after moving into the unmapped area of
the virtual desktop. To reestablish the correct screen cursor position,
lift the pen away from the pen display tablet surface and bring it back
to within 5 mm (0.2 inch) over an area of the tablet that is mapped to
a display area.
You must use a mouse when working in a full screen DOS window.
When the C P
LOSE ROGRAM
active the pen tablet will not work. Use your mouse or keyboard to
continue. When this dialog box is closed, you can again use your pen
to control the screen cursor.
Reboot the system after installing the pen display tablet on a system
with multiple users.
dialog box (Windows 98SE or Me) is