Wacom DTU-710 - MANUAL 2 User Manual
  1. Manuals
  2. Brands
  3. Wacom Manuals
  4. Graphics Tablet
  5. DTU-710
  6. User manual
Wacom DTU-710 - MANUAL 2 User Manual

Wacom DTU-710 - MANUAL 2 User Manual

Interactive pen display
Hide thumbs Also See for DTU-710 - MANUAL 2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual and Installation Instructions

Introduction and Overview

The Wacom® DTU-710™ Interactive Pen Display combines an LCD monitor with a
Wacom tablet.
This gives you a direct point-and-draw-on-screen interface that can be used with a
Personal Computer (PC) or Macintosh computer. DTU-710's basic components include
a Wacom tablet internally mounted behind a 17.0" diagonal TFT color LCD monitor, and
Wacom's pen.
Your DTU-710 Interactive Pen Display offers a number of significant advantages over a
standard monitor:
Reduced power consumption
■
Reduced heat generation
■
Requires less work space
■
Flicker free and easier on the eyes
■
Integrated input and display
■
Pressure-sensitive drawing directly on the display screen.
■
This manual describes how to install DTU-710 hardware and software. It also describes
how to use DTU-710 and the pen. Note that the computer treats the two parts of
DTU-710 (the LCD monitor and the Wacom tablet) as separate pieces of hardware.
Therefore, the installation process is completed in two stages. First, you will install the
LCD monitor portion of DTU-710. In the second stage you will install DTU-710's tablet
functionality.
You can find information on using the Wacom Tablet Control Panel for customizing your
tablet and pen settings in the online Help, located under the Help menu in the Wacom
Tablet Control Panel.
The following are not included with this product:
Information about your specific computer hardware
■
Information about your operating system
■
Information about application software.
■
Please refer also to your computer hardware, operating system, or software application
manuals.
To use the pressure-sensitivity of the pen with your favorite drawing application, refer to
instructions in that application's manuals.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTU-710 - MANUAL 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wacom DTU-710 - MANUAL 2

Summary of Contents for Wacom DTU-710 - MANUAL 2

  • Page 1: Introduction And Overview

    You can find information on using the Wacom Tablet Control Panel for customizing your tablet and pen settings in the online Help, located under the Help menu in the Wacom Tablet Control Panel. The following are not included with this product: Information about your specific computer hardware...

  • Page 2: Precautions On Use And Handling

    Failure to do so could cause the loss of data or damege of your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility for such loss or damage and to repair or replace the product.
  • Page 3 DTU-710 and your computer is turned on; it may damage the LCD display or computer video card. Do not disassemble DTU-710 or pen. This may cause DTU-710 or pen to malfunction. In this case, Wacom shall have no responsibility to repair or replace the product. Do not use or store DTU-710 where: - Temperature changes are severe (e.g., outdoors or inside a vehicle).

  • Page 4: Table Of Contents

    Connect DTU-710 to a computer ..........6 Tablet Driver Installation ..............8 Uninstalling The DTU-710 .............9 Customizing The DTU-710 – The Basics ..........10 Opening the Wacom Tablet Control Panel Control Panel Basics Control Panel Details Calibrating the DTU-710 DTU-710 Component Functions ..........16...

  • Page 5: Checking Packed Components

    AC Adaptor and Cable DTU-710 main unit Pen with Pen Stand USB Cable and RS-232C Cable* User's Guide Wacom Tablet CD Contains the driver soft- ware. (Windows/Macintosh) DVI-DVI Cable and DVI-VGA Cable* Some package configurations includ an additional CD containing bundled software applications.

  • Page 6: Connect Dtu-710 To A Computer

    If you are using analog (VGA) mode, you may also want to fine-tune the display. Please refer to Adjusting the LCD Monitor on page 22 for more information. To install the Wacom tablet software, turn off your computer and connect the USB cable or serial data cable.
  • Page 7 Rear Panel of your computer Video card To serial port Connect one cable only. To USB port DVI-DVI or DVI-VGA cable Ground to AC outlet RS-232C connector USB connector Cable guides DC input DVI/VGA switch DVI-I connector...

  • Page 8: Tablet Driver Installation

    Tablet Driver Installation Before you install the tablet software of DTU-710, you need to connect the USB cable or the serial data cable (Windows only) of DTU-710 to your computer. After connecting it, you turn on DTU-710 and your computer. Windows: First turn on the DTU-710.

  • Page 9: Uninstalling The Dtu-710

    Uninstalling The DTU-710 Follow the appropriate procedure below to remove the DTU-710 Interactive Pen Display and software from your system. When you remove the Wacom tablet driver software from your Important system, any other Wacom tablet connected to your computer will no longer operate with full Wacom tablet functionality.

  • Page 10: Customizing The Dtu-710 - The Basics

    Customizing The DTU-710 – The Basics The Wacom Tablet Control Panel makes it easy to customize your Interactive Pen Display and the pen. Opening the Wacom Tablet Control Panel To open the control panel, use the DTU-710 pen on the pen display tablet: Windows: Click on the Windows START button and choose ALL PROGRAMS.

  • Page 11: Control Panel Basics

    Control Panel Basics Open the Tablet control panel to begin customizing your product. Experiment with different settings to find what works best for you. Any changes you make will take effect immediately, but you can always click DEFAULT to return to the factory settings. Additionally, your keyboard tab and arrow keys can be used to navigate the control panel.

  • Page 12: Control Panel Details

    Customizing DTU-710 – The Basics Control Panel Details Pen Tip Feel & Eraser Feel Move the Tip or Eraser Feel slider to adjust the sensitivity of the pen tip or eraser. To create broad brush strokes or to click with a light touch, use a soft tip setting. maximum control while drawing thin lines, use a firmer setting.

  • Page 13: Mode Toggle

    • Mode Toggle toggles between Pen Mode and Mouse Mode. • Ink Toggle (pen and Macintosh OS X ) lets you use your pen to toggle the Ink Anywhere function of Inkwell on and off. Note that Ink must be turned on for this button function to work. •...

  • Page 14: Calibrating The Dtu-710

    Set the DTU-710 in its working position, then follow the procedure below. From the WACOM TABLET Control Panel, select the CALIBRATION tab. If you are working with multiple monitors, select the Monitor that corresponds to the tablet's LCD display.
  • Page 15 Hold the pen as you normally do, and use the pen tip to click on the cross-hairs in the upper-left corner. Then click on the cross-hairs that are displayed in the lower-right corner. (For Windows systems, you will need to click APPLY or OK for the changes to take effect.) Test the alignment and click OK to accept the calibration.

  • Page 16: Dtu-710 Component Functions

    DTU-710 Component Functions Front View - (minus) Button, + (plus) Button MENU Button In the OSD*1 menu, Use these buttons to select an option that can then be Opens and closes the activated. After activating a selected option, press the + button to increase a OSD*1 menu.

  • Page 17: Rear View

    Rear View Stand Adjustment Lever Pull this lever to adjust the stand. Release the lever to lock the stand in place. Connector Panel Cover To remove, slide it to the right. CAUTION Be careful to avoid catching your finger in the gap of the movable portion of the stand.

  • Page 18: Using An Alternate Mount Or Stand

    DTU-710 Component Functions Using an Alternate Mount or Stand If you will be using DTU-710 in an installation that requires the use of an alternate mounting platform, you can remove the adjustable stand from DTU-710 and mount the pen display onto a VESA conforming mount arm or stand. A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm.

  • Page 19: Using The Pen

    Using the Pen Hold the pen as you would a pencil. Make sure the side switch is in a convenient location where you can press it with your thumb or forefinger, but won't accidentally press it while drawing. Eeasar Second Side Switch Side Switch Tip Switch Pen Tip...

  • Page 20: Using A Pen

    Using a Pen Using a Pen Pointing and Selecting Move the pen above DTU-710 screen to position the screen cursor. The cursor instantly jumps to the new location (absolute positioning). Press the pen tip on DTU-710 screen to make a selection. If the screen cursor is not aligned with the pen tip, you will need Note to calibrate DTU-710.
  • Page 21 Important Do not remove the switch by prying it from either end as this may damage your Pen. Remove the pen tip cone by turning it counterclockwise. Pull the grip forward over the pen tip. NEVER adjust the trimmer capacitor that became visible as it is fine tuned.

  • Page 22: Adjusting The Lcd Monitor

    Adjusting the LCD Monitor Factory Presets, Multi-sync, and User Settings Factory Presets: To display images with the best quality (based on the incoming signal), DTU-710 comes with a number of factory default standard display modes. Multi-Sync: When connected as a VGA display, DTU-710 attempts to automatically synchronize to the incoming signal.
  • Page 23 Horizontal Center(VGA only) Menu Position Select to move the screen Select to move the OSD image left or right. menu around the display. To automatically adjust, use the Reset option. Vertical Center Reset Provides two options: (VGA only) Use Auto Adjust to Select to move the screen reset only the image image up or down.

  • Page 24: Adjusting Pitch And Phase (Vga Only)

    For crisp images, set the DTU-710 resolution of your video card to 1280 x 1024. From the Wacom Tablet Control Panel, select the CALIBRATION tab. If you are working with multiple monitors, be sure the display corresponding to the DTU-710 is selected in the MONITOR menu.

  • Page 25: Power Saving

    Using the OSD controls, open the OSD Menu and select the PITCH icon. Adjust the Pitch level so the pattern of fine vertical stripes displays evenly. In the OSD Menu, select the Phase icon and adjust the Phase level so the adjustment pattern shows clearly.

  • Page 26: Caring For Dtu-710

    Caring for DTU-710 Cleaning T o clean the DTU-710 casing, use a soft cloth with mild detergent (such as dish washing liquid) diluted with water. Do not use paint thinner, benzine, alcohol, or other organic solvents to clean DTU-710 casing or pen. To clean the display screen, use a soft, dry cloth.

  • Page 27: Troubleshooting

    Troubleshooting If you encounter problems with DTU-710 display, refer to the following tables. Your problem may be described here, and you can try the solution offered. For additional information about color issues, refer to the documentation that came with your operating system or applications. Display Troubleshooting General Display Problems Problem...

  • Page 28: Vga Problems

    Troubleshooting Problem Hint No display. The power LED is off. Check that the AC power adaptor is plugged into both the pen display tablet and an active power outlet, and that the DTU-710 power switch is turned on. No display. The power LED is lit Check the contrast, brightness, and backlight cntrols.Adjust blue.

  • Page 29: Pen Tablet Troubleshooting

    Pen Tablet Troubleshooting General Problems Problem Hint The computer does not have an Check if there is an available USB port on a USB hub. If available USB port. none are available, you will need to add a USB hub or USB card.
  • Page 30 Troubleshooting Problem Hint You have to press hard with the pen Open the tablet control panel and go to the PEN tab. Move when clicking or drawing. the TIP FEEL slider toward SOFT. The side switch does not work. Be sure you are using the pen (model UP-911E) that originally came with your pen display tablet.
  • Page 31 FILES button. Log out, then log back in. When the tablet driver loads, it will create new preferences files with the factory defaults. Note: Do not manually remove the WACOM TABLET.PREFPANE file from the main LIBRARY PREFERENCEPANES folder. This file is only to be removed when uninstalling the tablet software driver, and then only when using the REMOVETABLET utility.
  • Page 32 Troubleshooting Windows-Specific Problems Problem Hint Windows 98SE or Me: On a multiple monitor system, the pen display tablet is When working with multiple mapped to the virtual desktop (a rectangular area covering all monitors, the screen cursor monitors). If your video display areas do not form a rectangle positioning is incorrect after because they are different sizes or they are not evenly aligned, moving into the unmapped area of...
  • Page 33 Macintosh-Specific Problems Problem Hint At startup, a dialog box appears The pen tablet was not detected at startup. Make sure the telling you that either the driver USB interface cable is securely connected and that the status failed to load or the tablet LED on the tablet turns on when the pen tip is pressed against preferences have not yet been the tabletʼs active area.

  • Page 34: Specifications

    Specifications General Specifications Physical dimensions (WxDxH): 418x362x57mm (excluding the stand) Weight: 6.2kg (including the stand) Main Unit input Voltage: DC12V Power consumption: 37W or less (DC12V) Operating temp. & humidity: 5 to 35 deg. C, 20 to 80%RH (non condensing) Storage temp.
  • Page 35 Tablet Reading technology: Electromagnetic reasonance method Active area: 337.9 x 270.3mm Resolution: lpmm (0.01mm) max. Accuracy: +/-0.5mm, four corners ( 7 mm wide, 25 mm long from each corner of four "L" shaped areas) to be +/-1.0mm Maximum reading height: Maximum report rate: 133 points/sec., max Pressure levels:...

  • Page 36: Obtaining Technical Support

    Support Staff If you think your DTU-710 Interactive Pen Display is not working properly, contact the Wacom authorized distributors in your area (Check your area distributor on the Wacom web site: http://ap.wacom.co.jp ), or contact us as the following: Asia...
  • Page 37 Copyright © WACOM Company, Limited, 2004 All rights reserved. No part of this manual may be reproduced except for your express personal use. WACOM reserves the right to revise this publication without obligation to provide notification of such changes. WACOM does its best to provide current and accurate information in this manual.

Table of Contents