Product Specifications - Wacom CINTIQ 21UX Installation Manual & Hardware Manual

Cintiq21UX_Manual.fm Page 58 Friday, January 28, 2005 6:49 PM
Product specifications
General specifications
Physical dimensions (W x D x H)
Weight
Input voltage
Power consumption
Operating temperature and humidity
Storage temperature and humidity
Certification and compliance
LCD monitor
Display
Screen size
Signal inputs
Resolution
Synchronization range
Pixel pitch
Color depth
Pixels
Brightness
Contrast ratio
Plug and Play
LCD quality
Appendix
Page 58
535 x 418 x 60 mm (21.08 x 16.47 x 2.36 in), excluding stand
8.5 kg (18.7 lb), excluding stand
10.2 kg (22.4 lb), including stand
12 VDC
80 W or less (12 VDC) in normal operation mode
4W or less (12VDC) in off, suspend, or standby modes
5° to 35° C, 20 to 80% RH (non-condensing)
-10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
FCC part 15 class B, CE, VCCI Class B, C-tick, MIC, BSMI, CCC
a-Si TFT active matrix LCD
21.3 in diagonal, 432 x 324 mm (17.0 x 12.8 in)
Digital: RGB LVDS
Analog: 0.7 Vp-p positive at 75 Ohm
H/V Separate sync, TTL level, positive/negative
H/V Composite sync, TTL level, positive/negative
1600 x 1200 pixels (UXGA), 1280 x 1024 pixels (SXGA),
1024 x 768 pixels (XGA), 800 x 600 pixels (SGA),
640 x 480 pixels (VGA), others
31 to 92 kHz (horizontal)
56 to 85 Hz (vertical)
60 Hz (vertical for UXGA)
0.27 x 0.27 mm (0.011 x 0.011 in)
16.77 million colors (24 bit)
1,920,000
2
250 cd/m (typical)
400:1
DDC2B
Each Cintiq LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. The Cintiq 21UX display contains 5.76 million
sub-pixels (red, green, or blue dots). A small number of sub-pixels
(13 or less) can be partially on or partially off – this does not mean
the display is defective. In a partially on sub-pixel, 50% or more of
the sub-pixel is always lit. In a partially off sub-pixel, 50% or more
of the sub-pixel is always dark.