Vga Problems - Wacom CINTIQ 17SX Installation Manual And User's Manual

The image appears multiple
times on the display.
When a still image is displayed
for a long period of time without
refreshing the screen, an after-
image remains for a short
period of time.
The color white does not
display as white.

VGA PROBLEMS

The display ripples or flickers.
The display is not clear.
The display and LCD panel are
not lined up. The display size
is not correct.
The display ripples or shows a
moiré pattern. The display
color is not even.
TROUBLESHOOTING
Page 30
• Do not extend the video cable. Do not use an input selector switch box.
• Use a screen saver or other power management feature.
• Verify that the display is operating at the factory default settings. If that is
not sufficient, then adjust color as necessary. For details on color
management, refer to your operating system and application
documentation.
• Verify that the video cable and connector are fully connected.
• Open the OSD menu, go to the R
A option. Then, if necessary, manually adjust pitch and phase.
DJUST
• Verify that the display adaptor or video card matches the specifications
for the DTU-710.
• Adjust the refresh rate in the Display Properties control panel.
• As necessary, adjust contrast or brightness, pitch and phase.
• Set the display resolution of your video card to 1280 x 1024.
• Open the OSD menu, go to the R
option.
• As necessary, adjust pitch and phase, and horizontal and vertical
position. Note that some video cards may not show the display in proper
sizing.
• Open the OSD menu, go to the R
option.
• As necessary, adjust pitch and phase.
menu, and select the A
ESET
menu, and select the R
ESET
menu, and select the R
ESET
UTO
ECALL
ECALL