Wireless Tutorial; Chapter 6 Wireless Tutorial; How To Connect To The Internet From A Notebook; Example Parameters - ZyXEL Communications NBG334S User Manual

C
H A P T E R

6.1 How to Connect to the Internet from a Notebook

This section gives you an example of how to set up an access point and wireless client such as
a notebook for wireless communication. The notebook (N) can access the Internet through an
AP wirelessly.

Figure 44 Wireless AP Connection to the Internet

N

6.1.1 Example Parameters

SSID
Channel
Security
An access point or wireless router is referred to as an "AP" and a computer with a wireless
network card or USB/PCI adapter is referred to as a "wireless client" here.
6.2 Enable and Configure Wireless Security on your
NBG334S
Follow the steps below to configure the wireless settings on your NBG334S.
The instructions require that your hardware is connected (see the Quick Start Guide) and you
are logged into the web configurator through your LAN connection (see
33).
1 Open the Wireless LAN > General screen in the AP's web configurator.
2 Make sure the Enable Wireless LAN check box is selected.
3 Enter SSID_Example3 as the SSID and select a channel.
NBG334S User's Guide

Wireless Tutorial

AP
SSID_Example3
6
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
6
Internet
Section 2.2 on page
89