Dynamic Dns; Dyna M Ic Dns; Overview; Dynamic Dns Screen - ZyXEL Communications NBG-418N v2 User Manual

11.1 O ve rvie w
Dynamic Domain Name Service (DDNS) services let you use a fixed domain name with a dynamic IP
address. Users can always use the same domain name instead of a different dynamic IP address that
changes each time to connect to the NBG-418N v2 or a server in your network.
Note: The NBG-418N v2 must have a public global IP address and you should have your
registered DDNS account information on hand.
11.2 Dyna m ic DNS Sc re e n
To configure your NBG-418N v2's DDNS, click
Fig ure 81 Network > DDNS
The following table describes the labels in this screen.
Table 51 Network > DDNS
L ABEL
Enable Dynamic
DNS
Service Provider
Host Name
User Name
Password
Apply
Reset
Dynamic DDNS Table
DESC RIPT IO N
Ena b le Dyna m ic DNS
Click the
Select the name of your DDNS Service provider from the drop-down list.
The Host name is the domain name that the DDNS service will map to your dynamic global IP
address. Type the host name fully qualified, for example, 'yourhost.mydomain.net'. You can
specify up to two host names in the field separated by a comma (",").
Type the User name that you used when you registered with the DDNS service.
Type the Password associated with the DDNS user name.
Apply
Click to save your changes back to the NBG-418N v2.
Click Re se t to begin configuring this screen afresh.
NBG-418N v2 User's Guide
C
HA PTER

Dyna m ic DNS

Ne two rk > DDNS
.
check box to enable DDNS.
112
1 1