Cisco CP-7914 - 7914 - Key Expansion Module Quick Start Manual page 7

Unplug the handset, and headset if one is attached to
Step 2
the phone.
Turn the Cisco IP Phone 7960 over and lay it on a
Step 3
protected flat surface to prevent it from being
scratched.
On the footstand, locate the two foot pins.
Step 4
Using a flat head screwdriver, carefully push away from
Step 5
your body on one of the foot pins to release it. Then
carefully push away from your body on the other foot
pin to release it.
Note
Lift off the footstand and store it separately.
Step 6
You may have to lift and hold the IP Phone to
support it when pushing the foot pins.
7