Adjusting the Contrast
Similar to the Cisco IP Phone 7960, you can adjust the contrast
on the 7914 Expansion Module.
To adjust the contrast, follow these steps.
On the Cisco IP Phone 7960, press the Settings button.
Select Contrast, and press the Select softkey.
Select Expansion Module(s) from the Contrast menu.
The Expansion Module 1 Contrast screen appears.
Press the Up and Down softkeys to obtain the desired
contrast on the 1st Expansion Module.
If you have a second Expansion Module, continue with
Step 5. Otherwise go to Step 7.
• have a second Expansion Module—press Next.
The Expansion Module 2 Contrast screen appears.
Press the Up and Down softkeys to obtain the
desired contrast on the 2nd Expansion Module.
• do not have a second Expansion Module—press
the Exit softkey to accept and save your changes.
Refer to the following table if you are having difficulty using
your 7914 Expansion Module.
No display on the
7914 Expansion Module
• Verify that all of the cable
connections are correct.
• Verify that you have power
7914 Expansion Module(s).