Seats and head restraints
Front seats
Introduction
WARNING
Only adjust the driver's seat when the vehicle is stationary – otherwise
■
risk of accident!
Caution when adjusting the seat! You may suffer crushing injuries as a re-
■
sult of adjusting the seat without paying proper attention.
Adjusting the front seats
Read and observe
on page 72 first.
The seats can be adjusted by pulling, pressing or turning the respective operat-
ing element in the direction of the arrows
Adjusting the seat in the longitudinal direction (after releasing, the control
A
lever must lock audibly)
Adjusting the seat height
B
Adjusting the tilt of the backrest (do not lean on the backrest when adjust-
C
ing)
Note
After a certain time, play can develop within the adjustment mechanism for
the backrest angle.
72
Operation
Fig. 72
Control elements on the seat
» Fig.
72.
Armrest setting
Read and observe
on page 72 first.
›
To adjust the height, lift the armrest in the direction of the arrow
one of the locking positions
» Fig.
›
To close, lift the armrest in the direction of arrow
fold down again.
Rear seats
Seat backrests
Fig. 74 Fold seat backrest forwards / standby position of the seat belt
Before folding the seat backrests forwards, adjust the position of the front
seats in such a way that they are not damaged by the seat backrests. If neces-
sary, remove the rear head restraints
Folding forward
›
Push the headrest into the seat backrest up to the latch.
›
Pull the outer seat belt to the side panel in the direction of arrow
Fig. 73
Adjusting the armrest
73.
past the stop and then
A
» page
74.
1
A
into
» Fig.
74.