Head Restraints - Skoda Fabia 2003 Owner's Manual

Head restraints

Using the system Safety
Fig. 44 Adjusting head
restraint
Fig. 45 Removing a
head restraint
Driving Tips General Maintenance
Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push
it up or down in direction of arrow
is achieved if the top edge of the head restraint is at least at
eye level or higher.
Adjusting the angle of a head restraint*
– The head restraint can be matched to the head of the occu-
pant by adjusting the angle in the direction of the arrow
⇒ fig.
44. Adjusting the angle of the head restraint provides
enhanced comfort for the user.
Removing and installing a head restraint
– Pull the head restraint up out of the backrest of the seat as far
as the stop (on the rear head restraints fold down the seat
backrest).
– Press the locking button in direction of arrow
pull the head restraint out.
– To re-insert the head restraint, push it down into the backrest
of the seat far enough until you hear the locking button
engage.
The head restraints on the front seats can be adjusted for tipping angle*
and height. The outer head restraints are not adjustable for height. The
middle head restraints* can be adjusted to two settings ⇒ page 66.
The head restraints must be adjusted to match the size of the seat occu-
pant. Correctly adjusted head restraints together with the seat belts offer
effective protection for the occupants.
Breakdown assist-
ance
Seats and Stowage
A ⇒ fig.
A
44. Best protection
A
B
⇒ fig. 45
and
Technical Data Fabia Praktik
65