Head Restraints - Skoda Fabia 2005 Owner's Manual

68 Seats and Stowage

Head restraints

Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push
it up or down in direction of arrow
is achieved if the top edge of the head restraint is at the same
level as the upper part of your head
Adjusting the angle of a head restraint*
– The head restraint can be matched to the head of the occu-
pant by adjusting the angle in the direction of the arrow
⇒ fig.
enhanced comfort for the user.
Removing and installing a head restraint
Fig. 47 Adjusting head
– Pull the head restraint up out of the backrest of the seat as far
restraint
as the stop (on the rear head restraints fold down the seat
backrest).
– Press the locking button in the direction of arrow
pull the head restraint out.
– To re-insert the head restraint, push it down into the backrest
of the seat far enough until you hear the locking button
engage.
The head restraints on the front seats can be adjusted for tipping angle*
and height. The outer head restraints are not adjustable for height. The
middle rear head restraint* is adjustable in two positions ⇒ page 69.
Fig. 48 Removing a
The head restraints must be adjusted to match the size of the seat occu-
head restraint
pant. Correctly adjusted head restraints together with the seat belts offer
effective protection for the occupants.
A ⇒ fig.
A
⇒ page 119, fig.
47. Adjusting the angle of the head restraint provides
47. Best protection
99.
A
B
⇒ fig. 48
and